Professional WD01 Wall Detector Scanner
Professional WD01 Wall Detector Scanner can detect metal in walls and ceilings and floors. Such as steel bars, copper pipes, cables. Also detects wooden beams, metal, cables under plasterboard. This is hot product of wall detection.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
Wall Detector Scanner Function Introduction
This Wall Detector can detect metal in walls and ceilings and floors. Such as steel bars, copper pipes, cables. Also detects wooden beams, metal, cables under plasterboard.
Wall Detector Scanner Specifications Kind Tips
> The position will be more accurate after repeated detection
> When a foreign object is detected and an alternating current is detected. The AC symbol on the wall detection will flash, The wall detection will make a short beep of "dididi"
> In "Foreign Object Detection" mode. When only alternating current is detected. The instrument only flashes the AC symbol on the display
Wall Detector Scanner Specifications
Basic Parameters
Battery capacity : 3.7V 300mAH | Equipment size : 138*68*22mm |
Continuous working time:About 2 hours | Auto shutdown time:About 5min |
Maximum Detection Depth
With iron metal | 120mm |
Non-ferrous metal(Copper) | 100mm |
Alternating current | 50mm |
Single-strand copper wire (>4mm²) | 40mm |
Foreign body (Generally refers to wood material) | Exact mode 20mm/Deep mode 38mm |
Note: The detection result will be affected by factors such as the material and size of the detected object, as well as the material and state of the detected surface. lf the cable is not live, the detection depth will be reduced. | |
Recent product
FNIRSI® WD01 advanced Wall Detector Scanner
FNIRSI® WD02 advanced Wall Detector Scanner
Professional WD01 Wall Detector Scanner
Professional WD02 Wall Detector Scanner
Wall Detector Scanner FNIRSI® WD02
FNIRSI® WD01 Wall Detector Scanner