FNIRSI® WD01 Wall Detector Scanner
This Wall Detector Scanner can detect metal in walls and ceilings and floors. The wall detection is a hot product in the market.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
Wall Detector Scanner Function Introduction
This Wall Detector Scanner can detect metal in walls and ceilings and floors. Such as steel bars, copper pipes, cables. Also detects wooden beams, metal, cables under plasterboard.
Wall Detector Scanner Specifications
Basic Parameters
Battery capacity : 3.7V 300mAH | Equipment size : 138*68*22mm |
Continuous working time: About 2 hours | Auto shutdown time: About 5min |
Maximum Detection Depth
With iron metal | 120mm |
Non-ferrous metal(Copper) | 100mm |
Alternating current | 50mm |
Single-strand copper wire (>4mm²) | 40mm |
Foreign body (Generally refers to wood material) | Exact mode 20mm/Deep mode 38mm |
Note: The wall detection result will be affected by factors such as the material and size of the detected object, as well as the material and state of the detected surface. lf the cable is not live, the detection depth will be reduced | |
Wall Detector Scanner Detection Note
> When detecting metal, the displayed depth of detection value on the display is synchronized with the detection operation. The accuracy of the depth value is related to the shape and material of the measured metal, the distribution of the measured object relative to the detector, and the properties of the surrounding medium of the measured object, etc.
> When the measured object is a standard steel bar or copper pipe with a diameter of 18mm, the accuracy of the depth value is the best. lf on the contrary, then the depth value can only be used as a rough reference value at this time.
Recent product
FNIRSI® WD01 advanced Wall Detector Scanner
FNIRSI® WD02 advanced Wall Detector Scanner
Professional WD01 Wall Detector Scanner
Professional WD02 Wall Detector Scanner
Wall Detector Scanner FNIRSI® WD02
FNIRSI® WD01 Wall Detector Scanner