FNIRSI® WD02 Wall Detector Scanner

Detailed Product Description

Wall Detector Scanner Introduction

This Wall Detector Scanner can detect metal (steel bars, copper pipes) and cables hidden in walls, ceilings and floors; wooden beams, metal and cables under plasterboard.

Wall Detector Scanner Precautions

●Please use a safe charger with a Type-C interface, voltage output of 5V and current ≥ 500mA. The company is not responsible for any accidents caused by the charger.

●Before starting up the wall detector, please make sure that there is no moisture on the detection area, and dry the detector with a cloth if necessary.

●Don't allow moisture to penetrate into the wall detection, and don't let sunlight shine directly on the detector.

●If the detector is first exposed to an environment with a large temperature difference, it is necessary to wait for the temperature of the detector recovering, the detector can be started.

●Using or operating transmitting equipment such as microwave ovens near the detector will affect the detection results.

●Basically speaking, the detection result will be affected by surrounding

environmental factors to some extent. So-called environmental factors refer to whether the decive is close to machines that generate strong magnetic or electromagnetic fields when detecting. In addition, wet gas, building materials

with metal, insulating materials covered with aluminum, wallpaper with good conductivity, carpet with conductivity or tiles will affect the detection results. Therefore, before drilling and sawing on wall panels, ceilings and floors, be sure to pay attention to relevant information (such as architectural drawings). 

Wall Detector Scanner Parameters and Specifications

Basic parameters

Recent product