TC100N Multi Gas Leak Detector For Industrial Gas
TC100N Multi Gas Leak Detector is designed to accurately detect gas concentrations. Ensure safety with precise monitoring in various environments.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
TC100N is a fixed gas detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. With ATEX approval, it is suitable for explosive environment use. it communicates with the control panel through 4-20mA analog output or RS485 digital signal.
The fixed gas detector is uesd forSteelworks, Petrochemical plants, Shipyards, Water treatment plants, Mines. Power plants, Food industry etc.
Fixed Gas Detector Key Features
- ATEX approved
- 4-20mA analog or RS485 digital output
- 2 relay output for 4-20mA type
- Sensor module design, easy for replacement
Electrochemical Sensor Principle
1. Principle: Using the active chemical properties of the gas to be measured, it has reducing or oxidizing properties. In the process of participating in the chemical reaction, electrons are released or absorbed. A large number of electrons form a current. The current size is proportional to the gas concentration. The concentration of the gas to be measured can be measured by measuring the current size.
2. Advantages: The performance is relatively stable. Most toxic and harmful gases can be measured by electrochemical sensors, and the measurement linearity is very good.
3. Disadvantages: Electrochemical sensors are consumables with a relatively short service life. The service life is 1-2 years in general environment, and needs to be replaced every 3-6 months in harsh environment. The maintenance cost is relatively high.
4. Use: It is mainly used for the detection of toxic and harmful gases.
Fixed Gas Detector Specifications
| Measuring gas | O2 | CO | H2S | Combustible |
| Measuring range | 0-25%vol | 0-500ppm | 0-100ppm | 0-100%LEL |
| Resolution | 0.1%vol | 1ppm | 1ppm | 1%LEL |
| Sensor type | Electrochemical | Electrochemical | Electrochemical | Catalytic |
| Sensor life | 1 year | 2 years | 2 years | 2 years |
| Sampling method | Natural diffusion | |||
| Response time | Toxic gas and O2: T90≤60s; Combustible: T90≤30s | |||
| Working temperature | -20℃~50℃ for toxic gas -40℃~70℃ for combustible gas | |||
| Signal output | 4-20mA/RS485 | |||
| Alarm output signal | 2 programmable relays for 4~20mA type | |||
| Conduit connection | G1/2 | |||
| Cable required | ≥1.5mm2×3 core cable(4-20mA type) ≥1.5mm2×4 core cable(RS 485 type) | |||
| Transmission distance | ≤1000m | |||
| Mounting type | Wall mounted | |||
| Working temperature | oxic gas:-20℃~50'C Combustible gas: -40℃~70℃ | |||
| Working humidity | ≤95%RH(no condensation) | |||
| Operation voltage | DC24V±25% | |||
| Consumption | <2W | |||
| Ingress Protection | IP65 | |||
| Housing material | Chamber: Aluminum alloy Sensor cover: Stainless steel | |||
| Dimension and weight | 196mm×186mm×68.5mm, about 1.2kg | |||
| Approval | Ex Ⅱ 2G Ex db llC T6 Gb | |||
| Cable / distance | 4-20mA type: 1.5 MM2, 3 wire, shielded,1000m (maximum) RS485 type: 1.5 MM2, 4 wire, shielded, 1000m (maximum) | |||
Recent product
GTQ-BS03 Multi Gas Detector To Detect Natural Gas
BS03 Multi Gas Detector For Industrial Comprehensive safety
TC100N Fixed Gas detector To Detect Multi Gas
GTQ-WD6200 Fixed Gas Detector For Industrial Gas Safety
GTQ-WD2200 Fixed Gas Leak Detector With Gas Alarm
GTQ-BS03 Fixed Gas Detector To Ensure Gas Safety
BS03 Multi Gas Detector To Detect Natural Gas