TC100N Fixed Multi Gas Detector To Detect Flammable Gas
TC100N a fixed multi gas detector, featuring advanced flammable gas detection for industrial safety. Essential for continuous monitoring, ensuring prompt alerts to prevent hazardous situations.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
TC100N is a fixed gas detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. With ATEX approval, it is suitable for explosive environment use. it communicates with the control panel through 4-20mA analog output or RS485 digital signal.
The fixed gas detector is uesd forSteelworks, Petrochemical plants, Shipyards, Water treatment plants, Mines. Power plants, Food industry etc.
Fixed Gas Detector Key Features
- ATEX approved
- 4-20mA analog or RS485 digital output
- 2 relay output for 4-20mA type
- Sensor module design, easy for replacement
Catalytic
Combustion Sensor Principle
1. Principle: The
principle of using the heat released by the combustion reaction of combustible
gas on its surface, that is, the temperature of the platinum wire coil
increases due to combustion, and the resistance value of the coil increases.
The concentration of the combustible gas can be known by measuring the change
in the resistance value of the platinum wire, which is suitable for measuring
low-concentration combustible gas.
2. Advantages: The
performance is relatively stable. Most combustible gases can be measured by
catalytic combustion sensors. The measurement is very linear and the cost is
lower than that of electrochemical sensors.
3. Disadvantages:
The process conditions are strict. Dust particles and droplets that affect the
life and treatment efficiency of the catalyst are not allowed in the exhaust
gas, and substances that poison the catalyst are not allowed to prevent
catalyst poisoning.
4. Use: Mainly
used to detect more combustible gases.
Fixed Gas Detector Specifications
| Measuring gas | O2 | CO | H2S | Combustible |
| Measuring range | 0-25%vol | 0-500ppm | 0-100ppm | 0-100%LEL |
| Resolution | 0.1%vol | 1ppm | 1ppm | 1%LEL |
| Sensor type | Electrochemical | Catalytic | ||
| Sensor life | 1 year | 2 years | 2 years | 2 years |
| Sampling method | Natural diffusion | |||
| Response time | Toxic gas and O2: T90≤60s; Combustible: T90≤30s | |||
| Working temperature | -20℃~50℃ for toxic gas -40℃~70℃ for combustible gas | |||
| Signal output | 4-20mA/RS485 | |||
| Alarm output signal | 2 programmable relays for 4~20mA type | |||
| Conduit connection | G1/2 | |||
| Cable required | ≥1.5mm2×3 core cable(4-20mA type) ≥1.5mm2×4 core cable(RS 485 type) | |||
| Transmission distance | ≤1000m | |||
| Mounting type | Wall mounted | |||
| Working temperature | oxic gas:-20℃~50'C Combustible gas: -40℃~70℃ | |||
| Working humidity | ≤95%RH(no condensation) | |||
| Operation voltage | DC24V±25% | |||
| Consumption | <2W | |||
| Ingress Protection | IP65 | |||
| Housing material | Chamber: Aluminum alloy Sensor cover: Stainless steel | |||
| Dimension and weight | 196mm×186mm×68.5mm, about 1.2kg | |||
| Approval | Ex Ⅱ 2G Ex db llC T6 Gb | |||
| Cable / distance | 4-20mA type: 1.5 MM2, 3 wire, shielded,1000m (maximum) RS485 type: 1.5 MM2, 4 wire, shielded, 1000m (maximum) | |||
Recent product
GTQ-WD6200 Gas Detection For Natural Gas
GTQ-WD2200 Flammable Gas Detector For Gas Leak
GTQ-BS03 Fixed Gas Detection For Methane Gas
BS03 Fixed Gas Detection Used To Detect Multi Gas
TC100N Fixed Gas Detector To Gas Leak
GTQ-WD6200 Gas Alarm Detector To Detect Harmful And Flammable Gas
GTQ-WD2200 Gas Safety To Toxic and Flammable Gas