TC100N Industrial Fixed Gas Detector
TC100N is a multi gas detector, it can detect many gases in industrial working environment. If you need fixed gas detector, pls contact us.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
TC100N is a fixed gas detector installed in a place where potential gas hazard exists to measure oxygen, toxic gas and combustible gas. With ATEX approval, it is suitable for explosive environment use. it communicates with the control panel through 4-20mA analog output or RS485 digital signal.
The fixed gas detector is uesd forSteelworks, Petrochemical plants, Shipyards, Water treatment plants, Mines. Power plants, Food industry etc.
Fixed Gas Detector Key Features
- ATEX approved
- 4-20mA analog or RS485 digital output
- 2 relay output for 4-20mA type
- Sensor module design, easy for replacement
Electrochemical Sensor Principle
1.Principle: Utilize the active chemical properties of the gas to be measured, which is reductive or oxidative. In the process of participating in the chemical reaction, electrons are released or absorbed. A large number of electrons form a current. The current size is proportional to the gas concentration. The concentration of the gas to be measured can be measured by measuring the current size.
2.Advantages: The performance is relatively stable. Most toxic and harmful gases can be measured by electrochemical sensors, and the measurement linearity is very good.
3.Disadvantages: Electrochemical sensors are consumables with a relatively short service life. The service life is 1-2 years in general environment, and needs to be replaced in 3-6 months in harsh environment, and the maintenance cost is relatively high.
4.Use: Mainly used for the detection of toxic and harmful gases.
Fixed Gas Detector Specifications
| Measuring gas | O2 | CO | H2S | Combustible |
| Measuring range | 0-25%vol | 0-500ppm | 0-100ppm | 0-100%LEL |
| Resolution | 0.1%vol | 1ppm | 1ppm | 1%LEL |
| Sensor type | Electrochemical | Catalytic | ||
| Sensor life | 1 year | 2 years | 2 years | 2 years |
| Sampling method | Natural diffusion | |||
| Response time | Toxic gas and O2: T90≤60s; Combustible: T90≤30s | |||
| Working temperature | -20℃~50℃ for toxic gas -40℃~70℃ for combustible gas | |||
| Signal output | 4-20mA/RS485 | |||
| Alarm output signal | 2 programmable relays for 4~20mA type | |||
| Conduit connection | G1/2 | |||
| Cable required | ≥1.5mm2×3 core cable(4-20mA type) ≥1.5mm2×4 core cable(RS 485 type) | |||
| Transmission distance | ≤1000m | |||
| Mounting type | Wall mounted | |||
| Working temperature | oxic gas:-20℃~50'C Combustible gas: -40℃~70℃ | |||
| Working humidity | ≤95%RH(no condensation) | |||
| Operation voltage | DC24V±25% | |||
| Consumption | <2W | |||
| Ingress Protection | IP65 | |||
| Housing material | Chamber: Aluminum alloy Sensor cover: Stainless steel | |||
| Dimension and weight | 196mm×186mm×68.5mm, about 1.2kg | |||
| Approval | Ex Ⅱ 2G Ex db llC T6 Gb | |||
| Cable / distance | 4-20mA type: 1.5 MM2, 3 wire, shielded,1000m (maximum) RS485 type: 1.5 MM2, 4 wire, shielded, 1000m (maximum) | |||
Recent product
GTQ-WD6200 Gas Detection For Natural Gas
GTQ-WD2200 Flammable Gas Detector For Gas Leak
GTQ-BS03 Fixed Gas Detection For Methane Gas
BS03 Fixed Gas Detection Used To Detect Multi Gas
TC100N Fixed Gas Detector To Gas Leak
GTQ-WD6200 Gas Alarm Detector To Detect Harmful And Flammable Gas
GTQ-WD2200 Gas Safety To Toxic and Flammable Gas