Air Quality Detector

Detailed Product Description

Product introduction of Air Quality Detector
Please do confirm whether the air quality detector is in good condition andthe accessories are complete after opening the package.1. Air Quality Detector (black, white)
2.Instructions
3. USB power cord
√ There is a protective film on the product screen.
√ No need to calibrate after starting up, work and detect automatically.
Instructions of Air Quality Detector

1. Press and hold the "on-off" key on the right for 3 seconds to turn on andtrun off, then it will display the current air quality parameters.

2. Air Quality Detector: lt displays the current CO: data, as well as thetemperature and humidity data, the colored ring will change according tothe COz conten.

3. lt is a simple operation that you can long press the "on-off" key on the rightside for 3 seconds to turn on and off.

4. The usB can be charged by plugging in a 5v power supply, The battery iconflashes in the charging state, and it stops when it is full, if the display is fullbut still flashing, it means that the charging is not saturated. Pleasewait fora while.

Technical Parameters of Air Quality Detector

CO2 Detection Range C02 Detection Sensitivity TVOC Detection Range HCHO Detection Range PM2.5 Detection Range PM2.5 Detection Sensitivity PM1.0 Detection Range PM10 Detection Range CO Detection Range CO Detection Sensitivity Temp MeasurementRange Temp Measurement Accuracy Humidity Measurement Range HumidityMeasurementAccuracy Charging Mode Battery Working Current	400-6000 PPM，+50+15%PPM 1PPM 0-2.0 mg/m3 0-0.6 mg/m3 0-1000 ug/m3 1 ug/m3 0-1000 ug/m3 0-1000 ug/m3 0-500 PPM 1PPM -10~50 ℃ ±2°C 0%~99%RH ±3%RH DC5V 1A TYPE-C USB interface Built-in lithium battery 2000mAh 260mA
Working Voltage	3.7V
Dead Weight	About 160g

Recent product