Corrosion-Resistant Modular Stormwater Infiltration Chambers

Detailed Product Description

     In the drainage at the same time has the function of infiltration,Infiltration Chamber is mainly used for rainwater retention and infiltration, rainwater is processed and replenished back to the ground. The product is characterized by light weight, large water storage capacity and quick installation. It adopts arch structure with high strength, and is designed with large area of infiltration slits on the side, which can quickly disperse the collected rainwater. 

Infiltration Drains Technical Data：

How to use infiltration drains:

Rainwater infiltration system design and application process, sometimes only take a single infiltration facilities is difficult to achieve both recharge the ground, flood mitigation, but also effective purification of rainwater water quality, the need for a variety of rainwater infiltration facilities or technology for the optimization of the combination of commonly used are the following:

(1) under the concave green space an infiltration canal.
The process is typical of Germany's rainwater infiltration technology MR system (Mulden Rigolen system), such as the treatment effect is good, can delay the sink time, to facilitate in situ treatment of rainwater, and the layout is flexible, widely used, mainly used in urban public buildings and roads near the process can be connected to infiltration pipe to continue to infiltrate rainwater.

(2) the initial abandonment of a permeable well a pipe a permeable canal.
Has an area of less, infiltration volume is large, in the land is tighter when this process can be used. However, since the infiltration well has relatively high requirements for stormwater quality, the pollutant removal effect of the initial flow disposal measures is required to be higher. Note: Abandoned flow interceptor.

(3) High-level flower beds, a low-potential green space, and a shallow vegetated ditch (infiltration trench).
This process usually first completes the infiltration and purification of roof rainwater through high flower beds, and then together with road rainwater, infiltrates through green areas lower than the road surface, shallow ditches with vegetation, sandless concrete infiltration ditches, etc., and finally infiltrates the purified rainwater into the ground. This process completely adopts ecological treatment methods to control the quality of rainwater, using plants and soil to retain pollutants in the rainwater, the treatment effect is good, but also can control the amount of water.

(4) Initial abandonment of the flow of a stormwater pond and an infiltration channel (infiltration pond).
In the rainwater quality is good (such as some roof rainwater), the process can be used to combine rainwater collection technology and infiltration technology. Initial abandonment to remove the initial pollutants of rainwater into the rain pool collection, part of the overflow rainwater into the infiltration facilities for infiltration. 

Recent product