Sediment Samplers 12.002 - Ekman Bottom corer, 400 cm²

The Ekman bottom corer is based on the Ekman design. The sediment sampler is made of AISI 316 stainless steel. It is a advanced bottom samplers.

Email: info@hn-guangqun.com
Phone: +86-13838155309

Live Chat Leave Message

Detailed Product Description

Sediment Samplers description
The Ekman bottom corer is based on the Ekman design. The sediment sampler is made of AISI 316 stainless steel.
To be deployed by means of a steel wire, recommended diameter 5 mm.

Sediment Samplers use suggestion

For higher performance the grab is configurable with extra lead weights, up to 16 pcs each 5 kg.

The Ekman grab has an automatic release system, once the grab hits the sea bed and the wire slackens, the lock system is deactivated. Retrieving the grab takes the sample.

The sampler comes with a security wire which must be attached to the deployment wire. If the grab gets stuck; i.e. by a stone on the seabed the thin wires located at each side of the top part may break, and you will loose the bottom part of the sampler.

Sample area: 400 cm² (20 x 20 cm)
Sample volume: 12 L
AISI 316 stainless steel
Finish: Electro polish
Automatic releaser
Standard delivery comes without weights
A maximum of 32 kg can be added
Total weight: Max. 50 kg
Dimensions when loaded:
360 x 280 x 650 mm
Max. height, released position: 105 cm
Weight (no lead weights): 18,5 kg

Sediment Samplers specification

Ordering no.	12.000	12.002
Sample volume:	5 L
Sample area:	225 cm²	400 cm² (20 x 20 cm)
Drop messenger, brass:	500 g	None (automatic release system)
Height:	45 cm	65 cm. Released position: 105 cm
Weight:	5,6 kg	18,5 kg
Extra weights:	None	Configurable with a max. of 16 weights, each 2 kg
Spare parts
Drop messenger, brass, Ø3,2 x 9 cm, 500 gr	Ordering no. 12.001
Spring for model 12.000 only, requires 2 pcs	Ordering no. 12.003