Gas Detector

Portable Gas Detector

E1000 portable single gas detector wirh alarm

E1000 portable single gas detector wirh alarm

E1000 is a portable single gas detector that can detect combustible gas to ensure the gas safety of the industrial environment. It is a gas alarm detector, it will issue a corresponding alarm if any abnormality is found.

Email: info@hn-guangqun.com
Phone: +86-13838155309

Live Chat    Leave Message

Detailed Product Description

Portable Gas Detector Description
E1000 is a portable rechargeable single gas detector. It can detect the concentration of combustible gases, oxygen and toxic gases in the surrounding environment, and send out information when an abnormality occurs. It’s easy for replacement and maintenance by the user himself with adopting smart sensor module.
It is applicable to explosion-proof places: teelworks, petrochemical plant, oil industry, shipbuilding yard, sewage treatment plant, mine, power supply works etc.

Portable Gas Detector Key Features

  • Real-time clock
  • Smart interchangeable sensor module
  • Calibration point adjustable
  • Two alarm level
  • STEL alarm and TWA alarm for toxic gases
  • Visual, audible, vibrating alarm
  • Self protection against high concentration combustible gas
  • Low battery alert
  • Data uploading
  • Password management
  • Self-test when power on
  • Self-diagnostic and self-correction function
  • GPS, GPRS and Man-down function optional

Different sampling methods

Natural diffusion is that the gas in the detected area flows slowly into the instrument for detection with the free flow of air, and needs to be placed on site. This method is affected by the detection environment, such as ambient temperature, wind speed, etc., and is not suitable for gas sources with low pressure. The advantage is low cost.

The pump suction type is that the instrument is equipped with a gas sampling pump. Its working method is that the power supply drives the gas sampling pump to extract and sample the gas in the test area, and then the sample gas is sent to the instrument for detection.The characteristics are fast detection speed, long-distance measurement of dangerous areas, and safety of maintenance personnel. It is suitable for occasions where the gas detector cannot be placed on site and has special requirements for reaction speed, pressure difference, etc.


Portable Gas Detector Specifications

Measuring gas
O2
CO
H2S
Combustible
Measuring range
0-                25%vol
0-500ppm
0-100ppm
0-100%LEL
Sensor type
Electrochemical
Catalytic
Sampling method
Natural diffusion
Working temperature
-20℃~50℃ for toxic gas
-40℃~70℃ for combustible gas
Working humidity
<95%RH (no dews)
Accuracy
±5% FS
Response time
T90<30s
Alarm sound
≥80dB @ 1m
Power source
DC3.7V 1800mAh Lithium battery
Charging time
4h~6h
Working time
Combustible gas: ≥8h
Toxic gas: ≥300h(20℃)
Ingress protection
IP66
Explosion-proof grade
Exib Ⅱ CT4
Event log
10,000 events
Housing
Rubber enclosure
Standard accessories
Operation manual, calibration cap, charge, screwdriver
Optional function
Data upload through USB cable
Dimension
108.4mm×61mm×36mm
Weight
About 191g

Recent product

E6000 Portable Multi Gas Detector To Detect Toxic Gas

E6000 Portable Multi Gas Detector To Detect Toxic Gas

JL269 Portable Gas Leak Detector

JL269 Portable Gas Leak Detector

E4000 industrial gas leak detector

E4000 industrial gas leak detector

E1000 Portable Gas Leak Detector To Detect Toxic and Combustible Gas

E1000 Portable Gas Leak Detector To Detect Toxic and Combustible Gas

BZ100 Portable Gas Leak Detector To Natural Gas

BZ100 Portable Gas Leak Detector To Natural Gas

BX176 Portable Single Gas Detection

BX176 Portable Single Gas Detection

BX171 Portable Gas Leak Detector To Natural Gas

BX171 Portable Gas Leak Detector To Natural Gas

BX616 Multi-gas Detector to Detect Combustible and Toxic Gas

BX616 Multi-gas Detector to Detect Combustible and Toxic Gas