AT8060 Fuel Cell Alcohol Tester in bar

AT8060 is an advanced fuel cell alcohol tester, which adopts new high-tech electrochemical sensor. It is a hot alcohol tester machine.

Email: info@hn-guangqun.com
Phone: +86-13838155309

Live Chat Leave Message

Detailed Product Description

Fuel Cell Alcohol Tester Description

AT8060 is a rechargeable alcohol tester with fuel cell sensor. AT8060 is an advanced portable breath alcohol tester machine, which adopts new high-tech electrochemical sensor. It could get more accurate alcohol concentration value, and with strong anti-interference ability.

Fuel Cell Alcohol Tester Principle

The fuel cell alcohol tester uses the fuel cell alcohol sensor as a gas sensor, which belongs to the electrochemical type, so it is also called the electrochemical type. Fuel cell is an environmentally friendly energy which is widely studied all over the world. It can convert combustible gas directly into electricity without pollution. Being an alcohol sensor is just one branch of a fuel cell. The fuel cell alcohol sensor uses the precious metal platinum as the electrode, and the combustion chamber is filled with a special catalyst, which can make the alcohol entering the combustion chamber fully burn into electrical energy, that is, a voltage is generated on the two electrodes, and the electrical energy is consumed on the external load. This voltage is proportional to the alcohol concentration of the gas entering the combustion chamber, which is the basic working principle of the fuel cell type breath alcohol tester.

Fuel Cell Alcohol Tester Feature

Fuel cell sensor-accuracy and reliance
Adjustable alarming threshold
Testing records (maximum 10) review
Switchable result units(mg/l, g/l, %BAC, ‰BAC)
Anti-backflow mouthpiece for health and safety

Fuel Cell Alcohol Tester Application

Car, hotel, home, workshop, office, etc.

Fuel Cell Alcohol Tester Specification

Sensor type	Fuel cell
Detection range	0.00 - 0.40%BAC, 0.00-4.00‰BAC 0.00 - 2.00mg/L; 0.00 - 4.00g/L
Accuracy	±0.005%BAC at 0.05%BAC
Pre-set level	0.05%BAC; 0.50‰BAC; 0.25mg/L; 0.50g/L
Warm-up time	<10 seconds
Testing time	< 5 Sec
Display	1.6-inch LCD
Power	2×AA batteries
Working environment	0℃ - 40℃, ≤95% RH, No dews
Working time	>2000 blowing times (full charge)
Dimensions	122mm X 67mm X 31mm @120g
Testing records	10 latest records