AT8030 Portable Alcohol Tester Multipurpose
AT8030 Portable Alcohol Tester can be used in lots of occasions, if you need a breathalyzer, plz contact us.
Email:
info@hn-guangqun.com
Phone:
+86-13838155309
Detailed Product Description
Alcohol Tester Description
AT8030 is an advanced portable alcohol tester, which adopts new high-tech electrochemical sensor . It could get more accurate alcohol concentration value, and with strong anti-interference ability. AT8030 breathalyzer has advanced fuel cell sensor, is suitable for lots of occasions.
Alcohol Tester Principle
The fuel cell alcohol tester uses the fuel cell alcohol sensor as a gas sensor, which belongs to the electrochemical type, so it is also called the electrochemical type. Fuel cell is an environmentally friendly energy which is widely studied all over the world. It can convert combustible gas directly into electricity without pollution. Being an alcohol sensor is just one branch of a fuel cell. The fuel cell alcohol sensor uses the precious metal platinum as the electrode, and the combustion chamber is filled with a special catalyst, which can make the alcohol entering the combustion chamber fully burn into electrical energy, that is, a voltage is generated on the two electrodes, and the electrical energy is consumed on the external load. This voltage is proportional to the alcohol concentration of the gas entering the combustion chamber, which is the basic working principle of the fuel cell type breath alcohol tester.
Alcohol Tester Information
Fuel cell sensor-accuracy and relianceTesting records (maximum 10) review
Switchable result units(mg/l, g/l, %BAC, ‰BAC)
Warm-up time: <10 seconds
Display: 1.5-inch LCD
Power: 2×AAA batteries
Fuel cell sensor-accuracy and reliance
Adjustable alarming threshold
Testing records (maximum 10) review
Switchable result units(mg/l, g/l, %BAC, ‰BAC)
Anti-backflow mouthpiece for health and safety
Car, hotel, home, workshop, office, etc.
Alcohol Tester Specification
Sensor type | Fuel cell |
Detection range | 0.00 - 0.40%BAC, 0.00-4.00‰BAC |
Accuracy | ±0.005%BAC at 0.05%BAC |
Pre-set level | 0.05%BAC; 0.50‰BAC; 0.25mg/L; 0.50g/L |
Warm-up time | <10 seconds |
Testing time | < 5 Sec |
Display | 1.5-inch LCD |
Power | 2×AAA batteries |
Working environment | 0℃ - 40℃, ≤95% RH, No dews |
Working time | >2000 blowing times (full charge) |
Dimensions | 127mm X 53mm X 22mm @75g |
Testing records | 10 latest records |